Product Catalog
Forged, Plate, or Custom. One Source.
Steel flanges across the full production spectrum. Forged ASME B16.5 from 1/2 inch through 24 inch, B16.47 large diameter, plate-cut AWWA and structural through 203 inch, and full custom machining when the catalog runs out. Plus the pipe fittings to match. One supplier, one purchase order, one MTR package.
Browse
What We Supply
Category 01
Flanges
The full steel flange catalog. Weld neck, slip-on, blind, threaded, socket weld, lap joint, reducing, orifice, spectacle blind, long weld neck, plate, and ring-type joint. Forged for pressure service, plate-cut for large-diameter water and structural work.
- - 1/2 inch through 203 inch diameters
- - A105 carbon through F91 chrome-moly
- - ASME B16.5, B16.47, AWWA C207, MSS SP-44
Category 02
Pipe Fittings
Butt-weld, socket-weld, and threaded fittings to ASME B16.9 and B16.11. Elbows, tees, reducers, caps, couplings, unions, and stub ends. Schedule 10 through XXH and hot induction bends as a specialty for non-standard radii.
- - Schedule 10 through XXH
- - Butt-weld, socket-weld, and threaded
- - Hot induction bends to spec
Category 03
Custom Machining
Non-standard bores, overbore flanges, special facings, RTJ grooves, weld overlay, and plate-cut to drawing. Up to 203 inch outside diameter on plate work. Send a drawing or a specification and we will quote it against real shop capacity.
- - Up to 203 inch outside diameter
- - Plate-cut, overbore, special facing
- - Weld overlay and hard facing
Standards Coverage
The Full Steel Flange Spectrum
A flange is only as useful as the standard it conforms to. We source across the entire steel flange production spectrum so a single project does not need three suppliers and three different MTR formats.
Why Source Here
Built for Procurement, Engineering, and Project Managers
Forged and Plate Under One Roof
Most distributors stop at forged B16.5 or stop at plate-cut waterworks. We supply both. Class 600 weld neck in A105 and a 96 inch AWWA C207 ring out of plate ship on the same purchase order if the project calls for it.
Material Traceability That Survives an Audit
Mill Test Reports tied to heat numbers, NACE MR0175 for sour service when specified, and full chemistry and mechanical reports on request. Standard practice, not an upcharge.
Inventory You Can Actually See
Houston-area stock on the common sizes and schedules, mill direct on the long tail. If we do not have it on the shelf, we will tell you a real lead time instead of a guess.
Engineering Help Without the Sales Routine
Bring the drawing, the line list, or the question. We will tell you what fits, what does not, and what the standard actually says. See the resources library and reference tools for self-serve material.
Ready for a Quote?
Send a line list, a drawing, or a question. We will come back with stock, lead times, and pricing on real items, not a brochure.